LNB (Low Noise Blockdown Converter)	C-Band LNA C-Band　PLL LNB C-Band ER PLL LNB Ku-Band PLL LNB X-Band ER PLL LNB Ka-Band ER PLL LNB

Price down for VSAT devices has started up internet service in Europe and America. VSAT system provides a service for wide-area, multiple-address, and displays its great power in instantaneous

SPC Electronics Corp, a global leader in the design,manufature,supply of LNB of VSAT has a wealth of experience in providing significant supplies to fulfill the needs of the wireless market.

FEATURES

■ Low Noise Amplifier
■ Reliability by design
■ High Quality by design
■ Low cost by design
■ Small, Light weight, Easy to install

■ TECHNICAL SPECIFICATIONS

Parameter	Specification
RF Input Frequency	3.4-4.2GHz	3.625-4.200GHz
Gain	48±5dB	54±4dB
Gain Flatness	5dBp-p@500MHz	5dBp-p@575MHz
Gain Slope	1dBp-p/@any 36MHz	1dBp-p/@any 36MHz
Noise Temperature	60K max.@+25C	60K max.@+25C
Input Return Loss	5dB min.(w/o Isolator)	5dB min.(w/o Isolator)
Output Return Loss	10dB min.	10dB min.
Output Level(P1dB)	+3dB min.	+5dB min.
DC Supply Voltage	+12 to +18V	+12 to +18V
Current	120mA max	120mA max
Output Connector	N Female	N Female
Weight	Approx.430g	Approx.430g
Size	64x160x37mm(without Flange)	64x160x37mm(without Flange)

SPC Electronics Corp, a global leader in the design,manufature,supply of LNB of VSAT has a wealth of experience in providing significant supplies to fulfill the needs of the wireless market.

FEATURES

■ High Stability, Low Noise Converter
■ Reliability by design
■ High Quality by design
■ Low cost by design
■ Small, Light weight, Easy to install

■ TECHNICAL SPECIFICATIONS

ITEM	SPECIFICATIONS
RF Input Frequency	3.400 to 4.200 GHz
IF Output Frequency	950 to 1750 MHz
Local Frequency	5.15 GHz
Local Stability	+/-2.5 ppm max. @-40 to +60 ℃ (Option: +/-1.0 ppm max.)
Noise Temperature	30K max. at +25℃
Gain (Over Freq. And Temp.)	55 to 70 dB
Gain Flatness (over band)	5 dBp-p max. (Gain 60 dB nominal)
Phase Noise (SSB)	-80 dBc/Hz typical @ 1KHz
	-85 dBc/Hz typical @ 10KHz
	-95 dBc/Hz typical @100KHz
Spurious in RX BAND	-140 dBm max. Measure at RF Input power -85dBm
Output Power @1dB G.C.P	+10 dBm min.
Power Requirement	+12 to +24 Vdc
Operating Current	300mA max.
Temperature	-40 to +60 ℃
Input Waveguide Flange	CPR-229
Output Connector	F-type 75Ω, female, Waterproof / N-type 50Ω, female, Waterproof
Weight	Approx. 550 g
Size	(L)144 x (W)68 x (H)39 mm (without Flange)

FEATURES

■ 1dB Gain Compression +10dBm
■ Suitable for high data rate digital communication applications
■ Low power consumption
■ Low power consumption
■ Low noise

SPC Electronics America, Inc., 105 Technology Pkwy., Norcross, GA 30092 Tel : (770)446-8626 Fax : (770) 441-2380
http://www.spcamerica.com/

■ TYPICAL SPECICATIONS SPCR3400 series

ITEM	SPECIFICATIONS
RF Input Frequency	3.4 to 4.2GHz
IF Output Frequency	950 to 1750MHz
Local Frequency	5.15GHz
Local Frequency Stability	Phase locked to external reference
Local Oscillator Leakage	-45 dBm max. @Waveguide input.
Requirement Extemal Reference	Supplied through the center connector of IF cable [Frequency] 10MHz(sine wave) [Input level] 0 to -10dBm. @IF out [Phase Noise] -144dBc/Hz max. @1KHz
Local Phase Noise	Offset Frequency 　 Phase Noise 1KHz -75 dBc/Hz max. 10KHz -85 dBc/Hz max. 100KHz -95 dBc/Hz max.
Noise Temperature (+25℃)	20K TYP, 30K Max.
Gain	55 to 70 dB Over Frequency & Temperature
Gain Ripple	1dB p-p max per 36MHz segment across the operating freq band.
Input VSWR	3.0:1 max.
Output VSWR	2.5:1 max. @75Ω
Image Rejection	-45dBc max.
1dB Gain Compression Point	+10dBm min.
Spurious in Rx Band	-130dBm max. @waveguide input excluding Rxout +/- 1MHz measured at RF input power -85dBm.
Input Voltage	+12 to +24 V supplied through center conductor of the IF cable.
Current	300mA max.
Size	(L)144 mm x (W)68 mm x (H)39 mm (5.6x2.6x1.5 in)
Weight	approx. 580 g (18 oz)
Operating Temperature	-40℃ to +60℃.
Storage Temperature	-40℃ to +60℃.
Input Interface	CPR‐229G, Waterproof (mated with matching flange and gasket )
Output Interface / Ordering information	Standard F‐Type, 75Ω, female, Waterproof Model SPCR3400AF Optional N‐Type, 50Ω, female, Waterproof Model SPCR3400AN

FEATURES

■ High Stability, Low Noise Converter
■ Reliability by design
■ High Quality by design
■ Low cost by design
■ Small, Light weight, Easy to install

SPC Electronics Corp, a global leader in the design,manufature,supply of LNB of VSAT has a wealth of experience in providing significant supplies to fulfill the needs of the wireless market.

■ TECHNICAL SPECIFICATIONS

Parameter	Specification
RF Input Frequency	10.95 to 11.70GHz	11.70 to 12.20GHz	12.25 to 12.75GHz
IF Output Frequency	950 to 1700MHz	950 to 1450MHz
Local Frequency	10.00GHz nominal	10.75GHz nominal	11.30GHz nominal
Local Frequency Initial Offset	±1ppm max. (Measured at 1 minute after DC power On)
Local Frequency Stability	±2.5ppm max. @-40℃ to +60℃ / ±1.0ppm max.@-40℃ to +60℃
Phase Noise	100Hz offset　　　-70dBc/Hz 1KHz offset　　　-80dBc/Hz
Noise Figure	0.8dB max. @+25℃
Gain (Over Freq. And Temp.)	55dB to 70dB @Over Freq.& Temp.
1dB Gain Compression Point	+10dBm min.
Gain Ripple	1dBp-p/36MHz over the frequency band @+25℃
Input VSWR	2.5:1 nominal (w/o isolator)
Output VSWR	2.3:1 normal @75Ω
DC Supply Voltage	+12V to +20V
Current	250mA max.
Output Connector	F-type 75Ω, female, Waterproof / N-type 50Ω, female, Waterproof
Weight	350g
Size	125 x 60 x 22 mm

FEATURES

SPC Electronics America, Inc., 105 Technology Pkwy., Norcross, GA 30092 Tel : (770)446-8626 Fax : (770) 441-2380
http://www.spcamerica.com/

■ ELECTRICAL SPECIFICATIONS　　Model : SPCR44FIAN

ITEM	SPECIFICATIONS	Notes
RF Input Frequency	7.25 to 7.75GHz
IF Output Frequency	950 to 1450MHz
Local Frequency	6.3GHz
Local Frequency Stability	Phase locked to external 10MHz reference
10MHz Reference	@ Multiplexed on the IF coaxial connector [Input level] -5 to +5dBm [Phase Noise] -135dBc/Hz max. @100Hz -148dBc/Hz max. @1KHz -152dBc/Hz max. @10KHz -155dBc/Hz max. @
Local Phase Noise	-65dBc/Hz max. @100Hz -75dBc/Hz max. @1KHz -85dBc/Hz max. @10KHz -95dBc/Hz max. @100KHz -105dBc/Hzmax. @1MHz
Local Leakage	-60dBm max at waveguide flange.
Noise Figure	0.7dB typ. @+23℃
Gain	62dB±4dB @Over temp. and freq.
Gain Flatness	±2.0dB max. @Over entire band
Ampritude　Response	±1.5dB max. @Over any 120MHz band ±0.5dB max. @Over any 10MHz band.
Input VSWR	1.3:1 max.
Output VSWR	2.0:1 max.
Image Rejection	-60dBc max.
P1dB	+15dBm min.
Signal Independent Spurious	-60dBm max. @Rx-band
Signal Related Spurious	-65dBc max. @0dBm output, Rx-band
Desense level	-40dBm, 7.9-8.4GHz @No more than 0.1dB of noise figure degradation
Overdrive	-20dBm @Non-damaging
Input DC Power	+15 to +24VDC, 500mA @Multiplexed on a single coaxial connector with the IF and 10MHz reference signal.
Input Interface	WR-112 waveguide, FPBR-84 flange
Output Interface	50Ω, N-type female coaxial connector.

■ MECHANICAL SPECIFICATIONS

ITEM	SPECIFICATIONS	Notes
Size	(L) 165mm x (W) 85mm x (H) 55mm　(with isolator)
Weight	approx. 800g
Color	Paint Code: White

■ ENVIRONMENTAL SPECIFICATIONS

ITEM	SPECIFICATIONS	Notes
Operating Temperature	-40℃ to +60℃
Operating Altitude	10,000 ft ASL
Operating Relative Humidity	100%, condensing
Non-operating Temperature	-50℃ to +70℃
Non-operating Altitude	50,000 ft. ASL
F Shock	20g, 11ms, half sine
Vibration	MIL-STD-810E, method 514-4

FEATURES

SPC Electronics America, Inc., 105 Technology Pkwy., Norcross, GA 30092 Tel : (770)446-8626 Fax : (770) 441-2380
http://www.spcamerica.com/

■ TECHNICAL SPECIFICATIONS　 Model : SPCR7400CN

ITEM	SPECIFICATIONS
RF Input Frequency	20.2 to 21.2GHz
IF Output Frequency	1000 to 2000MHz
Local Frequency	19.2GHz
Local Frequency Stability	Phase locked to external 10MHz reference
10MHz Reference	@ Multiplexed on the IF coaxial connector [Input level] -5 to +5dBm [Phase Noise] -135dBc/Hz max. @100Hz -148dBc/Hz max. @1KHz -152dBc/Hz max. @10KHz -155dBc/Hz max. @
Local Phase Noise	-62dBc/Hz max. @100Hz -72dBc/Hz max. @1KHz -82dBc/Hz max. @10KHz -92dBc/Hz max. @100KHz -102dBc/Hz max. @1MHz
Local Leakage	-60dBm max at waveguide flange.
Noise Figure	1.7dB typ. @ +23℃
Gain	60dB±4dB Over temp. and freq.
Gain Flatness	±2.0dB max. Over band
Gain Stability	±1.0dB max. Over 24hr at +25℃
Input VSWR	1.3:1 max.
Output VSWR	1.8:1 max.
Image Rejection	-45dBc max.
P1dB	+15dBm min.
Spurious	The sum all spurious power shall be 20dBbelow the power of the thermal output noise in a 1000MHz BW.
Input DC Power	+15 to +24VDC, 400mA @Multiplexed on a single coaxial connector with the IF and 10MHz reference signal.
Input Interface	WR-42 waveguide flange with O-ring and threaded screw holes.
Output iInterface	50Ω, N-type female coaxial connector.
DC Current	400mA max.

■ MECHANICAL SPECIFICATIONS

ITEM	SPECIFICATIONS
Size	(L) 153mm x (W)77mm x (H) 51mm
Weight	approx. 700g
Color	White.Munsel N9.5,semiqloss

■ ENVIRONMENTAL SPECIFICATIONS

ITEM	SPECIFICATIONS
Operating Temperature	-40℃ to +60℃
Operating Altitude	10,000 ft ASL
Operating Relative Humidity	100%, condensing
Non-operating Temperature	-50℃ to +70℃
Non-operating Altitude	50,000 ft. ASL
F Shock	20g, 11ms, half sine
Vibration	MIL-STD-810E, method 514-4